FFP2 Masks

FFP2 masks provide protection against moderate levels of dust, aerosols, and airborne particles, filtering at least 94% of particles. FFP3 masks offer the highest level of protection, filtering at least 99% of particles, making them suitable for higher-risk environments such as construction, healthcare, and tasks involving hazardous dusts like silica or asbestos (non-licensed work).

Dust masks are designed to protect against airborne particles such as dust, fibres, and mists. They are commonly used in construction, woodworking, DIY, and general maintenance tasks. For higher-risk dust exposure, FFP3 masks or P3 filters are recommended.

Disposable masks, such as FFP2 and FFP3 masks, are designed for single use, while reusable respirators use replaceable filters and are intended for long-term use. Reusable options, including half face and full face respirators, often provide a more secure fit and higher levels of protection over time.

A half face respirator covers the nose and mouth and is used with replaceable filters to protect against dusts, fumes, gases, and vapours. It is lightweight and suitable for a wide range of applications but requires separate eye protection.

A full face respirator mask covers the eyes, nose, and mouth, providing complete facial protection. It offers a higher level of safety than half masks, protecting against airborne hazards as well as splashes, gases, and fine particles, making it ideal for more hazardous environments.

The right respirator depends on the hazard:

• FFP2 / FFP3 masks – for disposable, short-term protection
  
• Half mask respirators – for reusable protection with filters
  
• Full face respirators – for maximum protection including eyes
  

Always match the respirator and filter to the specific risks in your environment.

This depends on the type:

• Disposable masks (FFP2/FFP3) – typically single shift or until damaged/clogged
  
• Reusable respirators – can be used long-term, with filters replaced as needed
  

Always follow manufacturer guidance.

FFP3 masks provide the highest level of disposable protection against fine particles and are suitable for non-licensed asbestos work, when used correctly and with proper training.

Yes, for effective protection, respirators should be properly fitted to your face. A face fit test ensures a tight seal, which is essential for both FFP masks and reusable respirators.

We can offer Face Fit Testing when you're spending over £1000 with us. Get in touch for more information.